1027
點擊圖片放大商品名稱:
TUF 1027 A/C Spring Lock Coupling Tools TOYOTA冷氣接頭拆卸器
TUF 1027 A/C Spring Lock Coupling Tools TOYOTA冷氣接頭拆卸器
詳細介紹:
* Special design for removing the spring lock coupling in A/C system.
* Two tools in a set for the different size of coupling.
* Suitable for TOYOTA after 2000.
更多商品
TUF 5116 Compressor Clutch Tool Kit 通用型壓縮機培令拆裝組
* Eye round clutch plate arbor SANDEN, DKS, ZEXEL.* Screws：1/4"-20 Hex, 3/8"-16 Hex, DKS, Zexel hub* Puller：DENSO, Ford, fine thread hub remover, coarse thread hub remover
TUF 1072 A/C Compressor Clutch Remover Kit 壓縮機培令拆裝組
* Replace clutches found on Fs6, C171, 6P & 148 computers.* Also GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.* Compressors of SANDEN Sd505, 507, 508, 510, 575, 708 and 709.* 2 & 3 hole puller plate fits most clutches, the mechanical force does the pulling job.
TUF 1092,1092M Tube Cutter & Flaring Tool 銅管切擴器(附黑頭)
* Contents:•Tube cutter：1/8"~1-1/8" •Flaring tool：1092：3/16", 1/4", 5/16", 3/8", 7/16", 1/2" & 5/8" O.D.1092M：4, 6, 8, 10, 12, 15, 16mm O.D.
TUF 5309 Thread Chaser Set(Metric) 冷氣管螺牙修護器
* Special design to repair and recondition threads on gas and liquid fittings in air condition, hydraulic and gas applications.* Each chaser is marked size and can be use to properly identify thread size.* Suitable for using on male and female threads.* Contents：M28-1.5P, M27-2P, M24-1.5P, M22-1.5P, M20-1.5P, M18-1.5P, M16-1.5P, M14-1.5P, puller pin
TUF IT1018 1000V Insulated Tool Kit(EVA-18Pcs) 絕緣工具組(18Pcs)
* Manufactured according to EN60900：2004. For work in the area of live part up to 1000V AC. VDE approved.* Contents：•1pc-- Cable knife•1pc-- Diagonal pliers 6"•1pc-- Long nose pliers 8"•1pc-- Wire strip pliers 6"•2pcs-- Screwdrive for phillips screw：PH1 x 80, PH2 x 100•3pcs-- Screwdrive for slotted screw：SL0.4x2.5x78, SL0.8x4.0x100, SL1x5.5x125•4pcs-- Hexagon nut spinner with handle：10x125, 8x125, 7x125, 6x125•5pcs-- Single open spanner：7, 8, 10, 12, 14mm
TUF IT1031 1/2" Dr.1000V Insulated Tool Kit(EVA-31Pcs) 4分絕緣工具組(31Pcs)
* Manufactured according to EN60900：2004. For work in the area of live part up to 1000V AC. VDE approved.* Contents：•1pc-- 1/2"Dr. reversible ratchet handle•8pcs-- 1/2"Dr. socket：10, 12, 13, 14, 17, 19, 22, 24mm•20pcs-- 1/2"Dr. socket bit：H5, H6, H7, H8, H10, PH2, PH3, PH4, SL6, SL8, SL10, T20, T25, T27, T30, T40, T45, T47, T50, T55•1pc-- T handle 1/2"Dr. x 197mm(L)•1pc-- Extension bar 1/2"Dr. x 5"(L)
TUF 5201 Professional Automotive Meter 多功能電錶(專業級)
* Full length：200x95x52mm* 3-3/4 digit, 3999 counts, bar graph display* RPM：600-4000, 6000-12000±2%* ms pulse width：0.1ms to 10.0ms±2%* Dwell angle：4, 5, 6, 8 cylinders±2%* Duty cycle：0-90% > 100μs, < 100ms±2%* DC volts(auto)：0-400mV/4/40/400/1000V±0.5%* AC volts(auto)：0-400mV/4/40/400/750V±1.2%* DC current：0-400mA/20A±1.0%* AC current：0-400mA/20A±1.5%* Resistance(auto)：0-400/4k/40k/400k/4M/40MΩ±1.0%* Capacitance(auto)：0-4nF/40/400/4μF /40μF±2.0%* Frequency (auto)：0-100Hz/1k/10k/100k/400kHz±0.1%* Temperature：-50 to 1100°C, -50 to 2000°F±1.0%* Resolution: 100μV, 100μA, 0.1Ω, 0.01Hz, 1°C/F* Diode test* Continuity test* Data hold* ZERO relative* Max/min hold* ±trigger* 20A fused* Auto power off* Safety test leads* Overload protection on all ranges
TUF 5202 Automotive Meter 多功能電錶(標準級)
* Full length：165x78x48mm* 3200 counts, bar graph display* RPM：600-3200, 6000-12000±2%* Dwell angle：4, 5, 6, 8 cylinders±2%* Duty cycle：0-90% > 100μs, < 100ms±2%* DC volts(auto)：0-320mV/ 3.2/ 32/ 320/ 600V±1.2%* AC volts(auto)：0-3.2V/32/ 320/ 600±2.0%* DC current：0-320μA/ 3.2/ 32/ 320mA/ 10A±2%* AC current：0-320μA/ 3.2/ 32/ 320mA/ 10A±2.5%* Resistance(auto)：0-320/ 3.2k/ 32k/ 320k/ 3.2M/30MΩ±1.5%* Frequency：10-320 HZ/ 3200 HZ/ 32kHZ±1.0%* Temperature：-30 to 750°C, -22 to 1400°F±2%* Resolution：100μV, 0.1μA, 0.1Ω, 0.1Hz, 1°C/ F* Diode test* Continuity test* Data hold* 10A fused* Auto power off* Safety test leads* Supplied probe: type K beaded wire thermocouple each input* Overload protection on all ranges* Safety input jacks
