8130
點擊圖片放大商品名稱:
規格介紹:
TUF 8130 Air Vacuum Dent Puller 氣動真空式鈑金拉拔器組
規格介紹:TUF 8130 Air Vacuum Dent Puller 氣動真空式鈑金拉拔器組
詳細介紹:
* Φ75, 100, 125mm rubber cups.
* Air inlet：1/4"
* Air pressure：90psi
* Sliding Hammer：1.22kg
更多商品
TUF 8146 Manual Vacuum Puller 手握式真空拉拔器(70mm)
TUF 8105 Break Plastic Connector 塑膠熔接植釘機
* Use on any kind of plastic. Such as bumper, upholstery, fender, etc...* Power：AC110V/220V, 50/60HZ* Size：110(W) x 160(D) x 110(H)mm* Contents：0.6mm nail x 100pcs, 0.8mm nail x100pcs, 90°nail x100pcs.① Switch on the power and set the temp, then put on the nail.② To fix the nail on the place where you want to fix and then push on the start to embed the nail in.③ When the nail embed into the proper position, remove the handle after 3 seconds for cooling the nail.④ Cut the remaining nail with cutting pliers. Notice the nail will come out when you cut it.
TUF 8126 Break Plastic Connector (標準型)塑膠植釘機
* Use on any kind of plastic, Such as bumper, upholstery, fender, etc...* Power：AC110V/220V, 50/60HZ* Size：110 (W) x 160 (D) x 110(H)mm* Contents: 0.6mm nail x 100pcs, 0.8mm nail x 100pcs, 90°nail x 100pcs* Switch on the power and set the temp, then put on the nail.* To fix the nail on the place where you want to fix and then push on the start to embed the nail in.* When the nail embed into the proper position, remove the hand after 3 seconds for cooling the nail.* Cut the remaining nail with cutting pilers. Notice the nail will come out when you cut it.
TUF 8127 Break Plastic Connector 230VAC 50HZ 1.7VAC 5A 3V150MA (簡易型)塑膠植釘機
* Contents：0.6mm nail x 100pcs, 0.8mm nail x 100pcs, 90°nail x 100pcs
TUF 8128 Break Plastic Connector 12/5A, No Load-1.5V,1.6V,1.7V 230/50HZ (專業型)塑膠植釘機
* Contents：0.6mm nail x 100pcs, 0.8mm nail x 100pcs, 90°nail x 100pcs
TUF 8145 PDC Hole Make Set . 汽車保險桿打孔器組
TUF 8135 Wiper-Arm Puller Set 兩用雨刷臂拔卸器
* Suitable：VW-Audi, BMW, Ford, Mercedes, Opel, Peugeot, etc. The first universal Puller Set to remove bolted Windscreen Wiper Arms, especially for those which have become rusted or corroded onto the drive-shaft. stubborn and deep-seated Wiper Arms may be quickly and easily removed wiper Arms with integratedscreen-Wash nozzles-e.g VW-Audi, BMW etc. on the rear window-can be easily removed by using the Slide hammer included in the Set. Wiper Arms with central holes may be removed by using the pressure Spindle. Those Wiper Arms with no central hole require the Pressure Bolt to be used with the Pressure Adaptor supplied* Contents：6xgrippers, 1xPressure spindle, 1xSlide Hammer
TUF 8133 5Pcs Wiper Arm Puller Set 5Pcs雨刷臂拔卸組
* Provide 4 adjustable removers & one high versatility puller fits nearly all difficult wiper arm removing works.
