8113
點擊圖片放大商品名稱:
TUF 8113 Razor Scraper 玻璃刮刀
TUF 8113 Razor Scraper 玻璃刮刀
詳細介紹:
* Offset scraping head and short handle are great for tight scraping jobs.
* L：4"
更多商品
TUF 8115 Door Weather Strip Molding Remover 窗戶水切拆卸器
* Made of special steel to remove the molding easily.* Suitable for replacing the rubber tap before spray paint work.* Also suit to use on the door weather strip without griping.
TUF 8139 Window Belt Molding Removal Tool 車門窗戶水切拆卸器(長型)
TUF 8140 2Pcs Light Cover Removal Tool 汽車燈座拆卸組2Pcs
TUF 8107-3,8107-4,8107-5 Manual Vacuum Puller 手動真空拉拔器
* Tray size：Φ75, 100, 125mm* Use the vacuum theory; push all the directions to suck the plate.* Pull the handle to fix the indentation with the plate.* This tool is also designed for changing the sheet glass.
TUF 8130 Air Vacuum Dent Puller 氣動真空式鈑金拉拔器組
* Φ75, 100, 125mm rubber cups.* Air inlet：1/4"* Air pressure：90psi* Sliding Hammer：1.22kg
TUF 8146 Manual Vacuum Puller 手握式真空拉拔器(70mm)
TUF 8105 Break Plastic Connector 塑膠熔接植釘機
* Use on any kind of plastic. Such as bumper, upholstery, fender, etc...* Power：AC110V/220V, 50/60HZ* Size：110(W) x 160(D) x 110(H)mm* Contents：0.6mm nail x 100pcs, 0.8mm nail x100pcs, 90°nail x100pcs.① Switch on the power and set the temp, then put on the nail.② To fix the nail on the place where you want to fix and then push on the start to embed the nail in.③ When the nail embed into the proper position, remove the handle after 3 seconds for cooling the nail.④ Cut the remaining nail with cutting pliers. Notice the nail will come out when you cut it.
TUF 8126 Break Plastic Connector (標準型)塑膠植釘機
* Use on any kind of plastic, Such as bumper, upholstery, fender, etc...* Power：AC110V/220V, 50/60HZ* Size：110 (W) x 160 (D) x 110(H)mm* Contents: 0.6mm nail x 100pcs, 0.8mm nail x 100pcs, 90°nail x 100pcs* Switch on the power and set the temp, then put on the nail.* To fix the nail on the place where you want to fix and then push on the start to embed the nail in.* When the nail embed into the proper position, remove the hand after 3 seconds for cooling the nail.* Cut the remaining nail with cutting pilers. Notice the nail will come out when you cut it.
